F8T-FK Build HELP please - Page 2

hakmazter · #21 08-03-2010, 11:59 PM

That is the motor mount that they are using. I have received 2 shipments with the same ones since I thought that maybe the ones were mislabeled or something. Apparently you need the small gear then as a quick solution. I will see if they can make an "old" one, but I fear it will be a wait of several weeks.

bbecker · #22 08-04-2010, 05:58 AM

Mike,

Don't worry about this ... I spoke to Rick and he had the same issue with this. I'll run the Truck with the original mount and use shorter screws.

Thanks,
Allen

bring it on · #23 08-04-2010, 11:35 AM

ya, Mike I have it taken care of. LOL

bbecker · #24 08-05-2010, 06:33 AM

Rick,

Look at this mount? Looks Tall enough

http://casterracingusa.com/product.p...6&cat=3&page=2

bring it on · #25 08-05-2010, 09:10 AM

LOL, yes that was the 1st replacement Mike sent me. It will work if you have the upper piece that goes on top. It is the tall but it's for the RTR and not the pro. I would guess it makes no difference though. 1 piece versus 2 piece

Rick

adrictan · #26 08-05-2010, 10:55 AM

If u're using the stock spur, u'll need to get the diff spacer.
http://casterracingusa.com/product.php?productid=102&cat=2&page=3

hakmazter · #27 08-05-2010, 11:34 PM

The plastic part is the same on buggy and truggy. Not sure what the part number is off the top of my head. We have way too many parts.

I cringe mentally on the idea of the 1/10 stuff coming in.

bbecker · #28 08-13-2010, 08:04 PM

Quote:

Originally Posted by hakmazter

That is the motor mount that they are using. I have received 2 shipments with the same ones since I thought that maybe the ones were mislabeled or something. Apparently you need the small gear then as a quick solution. I will see if they can make an "old" one, but I fear it will be a wait of several weeks.

Finally figure out... that motor mount is for the F8T 1.5 version which has an 46T Spur.

bring it on · #29 08-13-2010, 10:19 PM

I have not yet seen a 1.5 F8T fusion. You have?

bbecker · #30 08-14-2010, 05:15 PM

yup...

http://casterracing.com/car/main_view.php?cid=4&iid=9

bring it on · #31 08-16-2010, 11:40 AM

Pics are not that good. Stand up servo and small center gear? Have you seen one in person?

Thanks, Rick

bbecker · #32 08-16-2010, 05:28 PM

Quote:

Originally Posted by bring it on

Pics are not that good. Stand up servo and small center gear? Have you seen one in person?

Thanks, Rick

Of course not.... I am bottom of the food chain... Just a regular customer. Not an team driver

The Front Brace is different.... Chassis is different because of that. They have the Conversion kit on the site so you can see the difference...